#1 Concrete Waterproofer

#1 Concrete Waterproofer: The Ultimate Solution for Your Concrete Surfaces

The number one arch enemy of concrete is water. Not only can water create harmful health risks with the growth of mold and mildew, but it can also create numerous problems for homeowners’ foundations. It serves as a carrier for salts and chlorides that can damage reinforcing steel in concrete, leading to spalling and cracking.

For instance, a basement exposed to constant moisture may develop mold, posing health risks to the occupants. Mold can lead to respiratory issues like asthma and other allergic reactions. Additionally, water infiltration can cause uneven settling of the foundation, resulting in costly repairs. A homeowner may notice cracks in their drywall or brickwork due to foundation issues.

To prevent water from damaging concrete basements, driveways, and other surfaces, using the #1 Concrete Waterproofer, a waterproofing concrete sealer, should be a priority. A multitude of sealers available in the market are elastomeric, latex-based, or acrylic-based. While these can help reduce water in the short term, they merely coat the surface rather than penetrating deeply.

Consequently, it is more akin to putting a bandaid on the problem instead of sealing from within. A visual example of this failure can often be seen in peeling paint or bubbling surfaces on driveways that have been treated with inferior sealers. When considering options, it’s crucial to understand that true waterproofing requires a more robust solution.

By using a penetrating, impregnating sealer that densifies and hardens concrete, you can ensure a fully waterproofed substrate. One of our favorite concrete waterproofers is Lithi-Tek 9500 concrete sealer. This sealer is an invisible, penetrating concrete sealer that will not only densify concrete but also waterproof it and help to prevent deleterious organic growth such as moss and algae, which thrive in damp conditions.

For example, in shaded areas of your yard, applying this sealer can significantly reduce the growth of moss that can otherwise create slippery surfaces. The chemically reactive and active ingredients seal the pores within the substrate, adequately blocking surface moisture while still maintaining the concrete’s ability to breathe.

After application, if you apply this sealer to your patio, you will notice that rainwater beads up and rolls off rather than soaking in. Importantly, it will not significantly modify the substrate’s appearance or traction, which is critical for safety, especially in high-traffic areas.

The sealer will only wear away if the concrete surface itself wears away over time. New or existing concrete can be treated, and performance can be improved in as little as two applications. The concentrated nature of the sealer allows for 1000 sq. ft. of coverage per coat from 1 gallon; two coats are recommended, so each gallon will yield 500 square feet worth of coverage. It is now readily available directly at or at Amazon.com, HomeDepot.com, and Lowes.com.

This concrete sealer only costs about $0.10 per square foot per application; considering the cost to replace concrete is about $7.00 per square foot, sealing concrete with the #1 Concrete Waterproofer, the 9500, is a worthwhile investment that can save homeowners from extensive repair costs down the line. Many homeowners have reported significant savings and the peace of mind that comes with knowing their properties are protected.

Concrete waterproofing is not just a precaution; it is an essential part of maintaining the integrity and longevity of your concrete surfaces. For example, in regions with heavy rainfall or freeze-thaw cycles, untreated concrete can suffer accelerated deterioration, leading to costly repairs and safety hazards.

Homeowners should also consider seasonal factors when applying sealers. Ideally, sealing should be done in dry weather to ensure proper curing and adherence, as moisture during application can lead to subpar results. Additionally, frequent inspections of concrete surfaces can help identify potential issues before they escalate.

Look for signs like efflorescence, cracks, or discoloration, which can indicate underlying moisture problems. When applying a new sealer, it’s vital to follow the manufacturer’s instructions regarding application methods, drying times, and environmental conditions. This diligence ensures that the sealer achieves its maximum effectiveness and provides long-lasting protection.

Establishing a routine maintenance schedule for your concrete surfaces can further enhance their durability and lifespan. Homeowners should also consider investing in a quality pressure washer to clean surfaces before sealing, ensuring optimal adherence of the waterproofing product.

When it comes to selecting the right waterproofing solution, it’s essential to consider various factors such as your specific needs, the type of concrete, and local climate conditions. For instance, in coastal areas where saltwater intrusion is a concern, selecting a sealer that specifically addresses saltwater damage is critical. Additionally, understanding the application process can help ensure that you achieve the best results. For example, applying multiple thin coats rather than a single thick coat can provide better coverage and effectiveness. Finally, always reach out to professionals for guidance if you’re unsure about which product to choose or how to apply it correctly. Their expertise can be invaluable, especially for large projects or specialized applications.