Short answer: most outdoor concrete should be sealed, and many indoor slabs benefit too. Concrete is porous. Unsealed, it soaks up water, deicing salts, oil and other contaminants, and that is what leads to spalling, pitting, cracking, staining and mold. Sealing costs a small fraction of what it costs to replace a slab, and a good penetrating sealer can protect concrete for years between applications.
What Sealing Protects Against
- Freeze-thaw damage: water that soaks into concrete expands when it freezes, breaking the surface apart over time.
- Deicing salts: salt and chlorides, including salt tracked in on your car, accelerate spalling and corrode reinforcing steel.
- Stains: oil, grease, leaves and rust soak into unsealed concrete and are hard to remove.
- Moisture and mold: in basements and shaded areas, a water-repellent sealer helps limit dampness, mildew, moss and efflorescence.
- Dusting and wear: densifiers harden the surface so garage and basement floors shed less dust.
Which Concrete Should Be Sealed?
Sealers can be used on driveways, patios, walkways, pool decks, garage floors, basements, stamped concrete, exposed aggregate, pavers, brick and stone. Sealing matters most for:
- Driveways and walkways in cold climates that see snow, ice and road salt
- Garage floors exposed to oil, fluids and tire traffic
- Basement floors and walls with dampness or efflorescence
- Stamped and colored concrete, where a sealer protects and enhances the color
When Sealing Isn’t Worth It
Sealing has limits. It won’t fix structural cracks, settling or drainage problems; fix those first. Brand-new concrete usually needs to cure before most sealers go on (see how long to wait to seal new concrete). And concrete that’s fully covered by flooring indoors usually needs moisture testing more than a sealer.
Which Type of Sealer to Use
- Penetrating sealers (silanes, siloxanes, silicates) soak in, leave a natural look and last the longest outdoors. See best penetrating concrete sealers.
- Acrylic sealers add gloss or a “wet look” and enhance color, but wear faster outdoors. See best acrylic concrete sealers.
- Epoxy, urethane and polyaspartic coatings build a hard, chemical-resistant film for garages, shops and warehouses. See best epoxy floor coatings.
Frequently Asked Questions
What happens if you don’t seal concrete?
It will still last, but it absorbs water, salt and stains. In cold climates, unsealed driveways often show surface scaling and pitting after a few winters.
How often should concrete be sealed?
It depends on the sealer. Penetrating sealers typically last five years or more; acrylics often need reapplying every one to three years outdoors. See how long concrete sealers last.
Is sealing concrete worth the cost?
Usually, yes. Sealing a driveway costs a small fraction of replacing it. See how much it costs to seal a concrete driveway.
Ready to choose a product? Start with our best concrete sealers guide.
