Concrete Sealer Reviews

  • Home
  • Best Concrete Sealers
  • Product Reviews
  • About Us
BEHR 1-Part Epoxy review – rated 3.6/5
0
Thursday, 29 October 2026 / Published in PRODUCT REVIEWS

BEHR Premium 1-Part Epoxy Concrete & Garage Floor Paint Review

Affiliate disclosure: Some links on this page are affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

BEHR Premium 1-Part Epoxy is a water-based, no-mix floor paint for garages, basements, porches and driveways, sold at Home Depot in a wide range of tintable colors. It is for homeowners who want a clean, colored floor in a weekend without mixing a two-part kit. The bottom line: it looks good and goes on easily, but it is a thin acrylic-epoxy paint, not a true epoxy coating, and it only holds up in a garage when the slab is etched properly and you give it the full week before parking.

TypeSingle-component floor paint (self-priming)
ChemistryWater-based 1-part epoxy (acrylic-epoxy)
FinishSatin; many tinted colors
Coverage300–400 sq ft/gal on rough surfaces; 400–500 sq ft/gal on smooth
Coats1–2 (no more than 2)
Dry/recoatDry to touch about 1 hour; recoat in 4–6 hours
CureLight foot traffic 24 hours; heavy foot traffic 72 hours; car tires 7 days; no washing for 30 days
Best forLight-use garages, basements, porches, patios
Not forVertical surfaces, hydrostatic pressure, industrial or forklift traffic
New concreteWait 30 days, then etch
At a glance (product details checked October 2026)

Watch: BEHR 1-Part Epoxy in 60 seconds

What It Is / How It Works

The product reviewed here as "BEHR Premium 1-Part Epoxy Concrete & Garage Floor Paint" is now sold as BEHR PREMIUM Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete & Garage Floor Paint. The base product numbers include No. 900 White Base, 901 Silver Gray, 902 Slate Gray and 930 Deep Base, and it is tinted at Home Depot.

"1-part epoxy" is the important phrase. A true epoxy is two parts, a resin and a hardener, that react chemically into a thick, hard film. A one-part epoxy is essentially a high-quality acrylic floor paint with some epoxy added for hardness and adhesion. It comes ready to use in the can, has under 50 g/L VOC and cleans up with soap and water. It dries by evaporation like other latex paints, so the film is much thinner than a 2-part kit, and it reaches its working strength over days rather than hours.

The current version is labeled self-priming. On bare concrete the first coat acts as the primer, although BEHR also allows its No. 880 Concrete & Masonry Bonding Primer. BEHR claims resistance to hot-tire pickup, automotive fluids and most household chemicals.

Where It Works Best (and where it doesn't)

It works best where the main goal is appearance and easy cleaning: basement floors, porches, patios, laundry rooms, workshops and garages that see light vehicle use. It is also a good way to even out blotchy or stained concrete, and the color range is much wider than most garage-floor kits.

Its limits are written right on the label. It is not for vertical surfaces, areas with hydrostatic pressure (water pushing up through the slab), industrial use or forklift traffic. BEHR also notes that tire-traffic areas may need an annual touch-up and that heavy traffic too soon causes failures that need spot recoating. If you drive in with hot tires every day, or the slab has moisture problems, a 2-part epoxy or polyaspartic system is a better match. Our best epoxy floor coatings guide covers those.

Owner feedback reflects that split. The Home Depot listing averaged about 4 out of 5 across more than a thousand reviews when we checked. Third-party reviewers point to skipped etching, moisture and hot tires as the usual reasons for peeling.

Pros

  • No mixing and no pot life; open the can and roll
  • Self-priming on bare concrete
  • Low VOC (under 50 g/L), low odor, soap-and-water cleanup
  • Good coverage: 300–500 sq ft per gallon per coat
  • Wide range of tintable colors
  • Interior and exterior use

Cons

  • Thin film compared with a 2-part epoxy; less resistant to hot tires and abrasion
  • 7-day wait before parking, and 30 days before washing
  • Etching is required on bare concrete; skipping it is a common cause of peeling
  • Not for slabs with moisture or hydrostatic pressure
  • Tire lanes may need annual touch-ups
  • Slippery when wet unless you add an anti-slip additive

How to Apply It

  1. Let new concrete cure 30 days. Do not use it on slabs with hydrostatic pressure.
  2. Clean and degrease. The floor must be clean, sound, dry and free of oil and grease.
  3. Etch bare concrete with a muriatic acid etcher to a texture like 150-grit sandpaper. Rinse off all residue and let it dry completely. Sprinkle water on the dry floor: it should soak in quickly. If it beads, etch again. On previously painted or sealed floors, strip or scrape failing coatings, scuff-sand gloss and spot-etch bare spots.
  4. Check conditions. Air and surface temperature between 50°F and 90°F, with no rain or heavy dew expected for 24 hours.
  5. Mix all cans together (box them) for consistent color. Do not thin.
  6. Prime or apply the first coat. On bare concrete, the first coat of this product (or BEHR No. 880 primer) serves as the primer. Cut in the edges with a brush, then roll a thin, even coat with a 3/8" nap roller in long strokes in one direction.
  7. Second coat. After 4–6 hours, decide whether a second coat is needed and roll it crosswise. Do not apply more than two coats.
  8. Respect the cure. Light foot traffic after 24 hours, furniture after 72 hours, cars after 7 days (cardboard under tires is allowed after 72 hours), and no wet cleaning for 30 days.

How It Compares

KILZ 1-Part Epoxy Acrylic Concrete & Garage Floor Paint. A very close match: same coverage range, same 50–90°F window, same 7-day wait for tires and the same restrictions. The main difference is that KILZ calls for its bonding primer on new or uncoated concrete, while BEHR's current formula is labeled self-priming.

2-part epoxy kits. Resin-and-hardener kits build a thicker, harder film that handles hot tires and chemicals better. They take more work, have a limited working time once mixed, and usually cost more, but they are the better choice for a daily-use garage.

Penetrating sealer. If you only want to protect bare concrete and do not need color, a penetrating sealer has nothing to peel and keeps the original look. See our best concrete sealers for 2026 roundup.

FAQ

Is BEHR 1-Part Epoxy real epoxy?

Not in the 2-part sense. It is a water-based, single-component paint with epoxy added for toughness. It is harder-wearing than ordinary porch paint but much thinner and softer than a mixed resin-and-hardener epoxy.

How long before I can park on it?

BEHR says to wait 7 days before car tires. If you must, you can put corrugated cardboard under the tires after 72 hours. Driving on it early is one of the most common causes of failure.

Why is my BEHR epoxy floor peeling?

The usual causes are poor prep (no etching, or etch residue left on the floor), moisture coming up through the slab, too-early traffic, or hot tires on a thin film. Peeled spots can be scraped, spot-etched, primed and recoated.

Can you put it over an old sealer or paint?

Yes, if the old coating is sound. Strip or scrape anything failing, scuff-sand glossy areas, clean the floor and spot-prime any bare concrete. Test a small area first.

Verdict

BEHR Premium Self-Priming 1-Part Epoxy is one of the easiest ways to put color on a concrete floor, and it is a fair value for basements, porches and light-use garages. Its weak points are the ones all 1-part floor paints share: a thin film, strict prep and a long wait before tires. Etch properly and be patient and it is a good DIY choice. Skip either and expect touch-ups. Our rating: 3.6/5.

See the manufacturer's product page

How we reviewed this product: this is a research-based review built from the manufacturer's technical data sheet and current retail listings. We have not run our own hands-on tests of this product. Details were checked in October 2026; always follow the current label.

Related Guides

  • Best Epoxy Floor Coatings for Garages & Basements
  • RockSolid Polycuramine Garage Floor Coating Kit Review
  • How to Test Concrete for Moisture
  • How to Acid Etch Concrete
  • Best Concrete Sealers for 2026

What you can read next

Sikagard-400 Enviroseal review – rated 4.4/5
Sikagard-400 Enviroseal (MasterProtect H 400) Review
DRYLOK Extreme review – rated 4.1/5
DRYLOK Extreme Masonry Waterproofer Review
Rainguard Micro-Seal review – rated 4.2/5
Rainguard Micro-Seal Penetrating Water Repellent Review

Search

Interesting Posts

  • Spalled concrete with flaking surface and exposed aggregate next to a smooth, broom-finished resurfaced section

    Spalling Concrete: What Causes It and How to Fix It

    Spalling concrete flakes and pits when water fr...
  • OKON S-40 review – rated 4.1/5

    Rust-Oleum OKON S-40 Water Repellent Sealer Review

    Affiliate disclosure: Some links on this page a...
  • KILZ 1-Part Epoxy review – rated 3.5/5

    KILZ 1-Part Epoxy Concrete & Garage Floor Paint Review

    Affiliate disclosure: Some links on this page a...
  • Rainguard Micro-Seal review – rated 4.2/5

    Rainguard Micro-Seal Penetrating Water Repellent Review

    Affiliate disclosure: Some links on this page a...
  • Valspar Waterproofer review – rated 3.7/5

    Valspar Concrete & Masonry Waterproofer Review

    Affiliate disclosure: Some links on this page a...

ABOUT US

ABOUT US

Concrete Sealer Reviews helps homeowners and contractors choose the right sealer, waterproofer or coating for driveways, garages, basements and patios. Articles are written by Mark Dominic. We earn affiliate commissions on some purchases, and some brands featured here have a business relationship with this site.

Subscribe to our newsletter to receive the latest news and articles!

Be the latest to read new product reviews!

  • Home
  • Best Concrete Sealers
  • Product Reviews
  • About Us

© 2026. All rights reserved. Concrete Sealer Reviews

TOP