Concrete Sealer Reviews

  • Home
  • Best Concrete Sealers
  • Product Reviews
  • About Us
Seal-Krete Clear-Seal review – rated 3.7/5
0
Thursday, 29 October 2026 / Published in PRODUCT REVIEWS

Seal-Krete Clear-Seal Concrete Protective Sealer Review

Affiliate disclosure: Some links on this page are affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Seal-Krete Clear-Seal is a water-based, urethane-fortified acrylic sealer from Rust-Oleum for interior and exterior concrete floors, patios, pool decks, garages and driveways. It’s low-odor, cleans up with soap and water, and adds a light sheen while resisting oil, salt, chlorine and hot-tire pickup. The bottom line: it’s an easy, user-friendly film sealer for homeowners who want some shine without solvent fumes, but its thin, low-solids film won’t match the depth or durability of heavier sealers.

TypeFilm-forming topical sealer
ChemistryWater-based urethane-acrylic blend; about 11.5% solids; VOC under 50 g/L
FinishSatin, gloss or low gloss depending on version; non-yellowing
Coverage150–300 sq ft/gal (satin listing); up to 500 sq ft/gal (low-gloss version), depending on porosity
Coats1 recommended; 2 for porous surfaces or more sheen
Dry/recoatTouch dry 1 hour; recoat 2 hours (77°F, 50% RH)
CureFoot traffic 24 hours; vehicles 72 hours
Best forHorizontal concrete: patios, porches, pool decks, garages, driveways, pavers, stamped concrete
Not forOver acid stains, oil-based paint, 2-part epoxy, glazed tile; areas with hydrostatic pressure
New concreteWait at least 30 days
At a glance (product details checked October 2026)

Watch: Seal-Krete Clear-Seal in 60 seconds

What It Is / How It Works

Clear-Seal is a topical sealer. It goes on milky white, dries clear, and leaves a thin protective film on the concrete. The resin is a proprietary blend of urethane and acrylic, which Rust-Oleum says gives it good UV resistance and gloss retention, an F pencil hardness, and resistance to most tires, including hot-tire pickup. In 1-hour spot tests, the data sheet lists resistance to gasoline, oil, water, salt and chlorine.

The product line has shifted over the years. The classic "Clear-Seal Concrete Protective Sealer" in Satin (604001) and Gloss (607001) is still listed at Home Depot and other retailers. Rust-Oleum also now sells a Clear-Seal Premium Low Gloss Sealer (365001), listed at Lowe's as a "soft-gloss" sealer that covers up to 500 sq ft per gallon in one coat. Both are water-based urethane-fortified acrylics, but check the label for the exact coverage and sheen of the can you buy.

At about 11.5% solids, Clear-Seal lays down a fairly light film. That's part of why it's easy to apply in one coat without puddles, but it also means it won't build the deep, glassy look of a high-solids solvent sealer.

Where It Works Best (and where it doesn't)

Clear-Seal is made for horizontal surfaces, inside and out. Typical uses are pool decks, patios, porches, driveways and garage floors, plus brick, stone, exposed aggregate, slate, pavers and stamped concrete. It can also go over sound, fully cured one-part water-based paints and stains, which is useful if you've painted a porch or patio and want a clear protective layer.

Don't use it over acid-based stains, oil-based coatings, 2-part epoxies or glazed tile, or anywhere with hydrostatic pressure, such as a basement slab with moisture coming up. Smooth, troweled concrete in basements and garages needs to be etched first so the sealer can bond. Rust-Oleum also warns that sealed smooth concrete can be slippery when wet, and suggests adding its Clear Grip anti-skid additive on high-traffic areas. If you'd rather keep a natural look with no film, see our best penetrating concrete sealers.

Pros

  • Water-based, low odor and low VOC; works indoors
  • Soap-and-water cleanup
  • Resists oil, gasoline, salt, chlorine and hot-tire pickup per the data sheet
  • Non-yellowing, with satin, gloss and low-gloss options
  • Can go over cured one-part water-based paints and stains
  • Fast recoat (2 hours)

Cons

  • Low solids means a thin film with less color depth than solvent wet-look sealers
  • Horizontal surfaces only
  • Long wait before driving on it (72 hours)
  • Smooth concrete needs etching, and sealed smooth floors can be slippery when wet
  • Not compatible with acid stains, oil-based coatings or epoxies
  • Product names, sheens and coverage claims vary between versions, which can be confusing

How to Apply It

  1. Wait for new concrete to cure at least 30 days. Freshly painted or stained surfaces need at least 72 hours.
  2. Clean the surface. Pressure washing is recommended. Use an oil stain remover on stubborn spots. For painted surfaces, clean with a TSP solution, rinse and let dry.
  3. Etch smooth concrete. Basement and garage floors with a troweled finish should be etched. If you use muriatic acid, neutralize it before sealing.
  4. Check the weather. Apply between 50°F and 90°F, with no drop below 50°F for 24 hours, and no rain expected for 12 hours.
  5. Stir gently; don't shake or thin. The goal is a smooth coat without foam.
  6. Roll it on. Dampen the roller, then saturate it. Use a 1/4" nap on smooth surfaces and 3/8" on rough or porous ones. Keep a wet edge and avoid puddles, foam and runs. If you use a pump sprayer, spray a fine mist and back-roll right away.
  7. Add a second coat if needed after 2 hours, for porous surfaces or more sheen. Allow 24 hours before foot traffic and 72 hours before vehicles, longer in cool or humid weather.

How It Compares

Eagle Supreme Seal is a solvent-based pure acrylic that gives a much glossier wet look on exterior concrete. It's ready for foot traffic in 4 hours, but it's exterior-only, has a strong odor and needs xylene for cleanup. Clear-Seal is the easier, friendlier choice; Eagle is the one for maximum gloss.

Penetrating silane/siloxane sealers like Rust-Oleum OKON S-40 leave no film, so nothing can peel or get slippery. They're a better pick for plain driveways in freeze/thaw climates, but they don't add sheen or block oil stains as well as a film.

For garage floors that see heavy use, a true epoxy or polyurethane coating gives a thicker, more chemical-resistant surface. See our best epoxy floor coatings guide.

FAQ

Is Seal-Krete Clear-Seal waterproof?

It forms a water-resistant film that keeps surface water, salt and many stains out. It's not for areas under hydrostatic pressure, so it won't stop moisture pushing up through a basement slab.

Can you put Clear-Seal over painted concrete?

Yes, over sound, one-part water-based paints and stains that have cured at least 72 hours. Don't use it over oil-based paints, 2-part epoxies or acid-based stains.

Can I use Clear-Seal on a garage floor?

Yes. Garages are a listed use, and Rust-Oleum says it resists hot-tire pickup. Etch smooth garage concrete first and wait 72 hours before parking on it.

How should I clean a floor sealed with Clear-Seal?

Use mild soap and water. Rust-Oleum says not to use solvent-based cleaners.

Verdict

Seal-Krete Clear-Seal is a convenient, low-odor water-based sealer that adds a light sheen and decent stain and tire resistance to patios, pool decks and garage floors. It's easy for a first-timer to apply and can go over water-based paint. The tradeoffs are a thin film, a 72-hour wait for vehicles, and a product lineup with overlapping names and coverage claims. It's a reasonable pick for low-stress surfaces; choose a heavier sealer or coating where you want maximum durability. Our rating: 3.7/5

How we reviewed this product: this is a research-based review built from the manufacturer's technical data sheet and current retail listings. We have not run our own hands-on tests of this product. Details were checked in October 2026; always follow the current label.

Where to Buy

Check Price on Amazon

  • Seal-Krete Clear-Seal Concrete Protective Sealer, Gloss (1 gal.)

Related Guides

  • Best Acrylic Concrete Sealers
  • Wet Look Sealer Review
  • Best Decorative Concrete Sealer
  • Stamped Concrete Sealer Review
  • Best Concrete Sealers for 2026

What you can read next

Cryli-Tek 5500 review – Home Depot rating 4.8/5
Cryli-Tek 5500 Review
Eagle Supreme Seal review – rated 4.0/5
Eagle Supreme Seal Wet Look Concrete Sealer Review
Valspar Solid Color Stain review – rated 3.4/5
Valspar Solid Color Concrete Stain Review

Search

Interesting Posts

  • Concrete slab with a matte, natural finish on the left and a glossy, wet-look finish on the right

    Wet Look vs. Natural Finish Concrete Sealer: Which Should You Choose?

    Wet-look sealers add gloss and color but need m...
  • Spalled concrete with flaking surface and exposed aggregate next to a smooth, broom-finished resurfaced section

    Spalling Concrete: What Causes It and How to Fix It

    Spalling concrete flakes and pits when water fr...
  • OKON S-40 review – rated 4.1/5

    Rust-Oleum OKON S-40 Water Repellent Sealer Review

    Affiliate disclosure: Some links on this page a...
  • KILZ 1-Part Epoxy review – rated 3.5/5

    KILZ 1-Part Epoxy Concrete & Garage Floor Paint Review

    Affiliate disclosure: Some links on this page a...
  • Rainguard Micro-Seal review – rated 4.2/5

    Rainguard Micro-Seal Penetrating Water Repellent Review

    Affiliate disclosure: Some links on this page a...

ABOUT US

ABOUT US

Concrete Sealer Reviews helps homeowners and contractors choose the right sealer, waterproofer or coating for driveways, garages, basements and patios. Articles are written by Mark Dominic. We earn affiliate commissions on some purchases, and some brands featured here have a business relationship with this site.

Subscribe to our newsletter to receive the latest news and articles!

Be the latest to read new product reviews!

  • Home
  • Best Concrete Sealers
  • Product Reviews
  • About Us

© 2026. All rights reserved. Concrete Sealer Reviews

TOP